Floor Sawing

We are specialists in road cutting and floor (or ‘slab’) sawing. Our floor saws use a wide range of power sources and blade sizes so we are able to cut concrete and asphalt for motorway construction, pavements, traffic detector channels, drainage ducts and removing or altering concrete slabs.

We can call upon petrol, diesel, electric or air-powered floor saws with the ability to produce uniform cuts (of widths and depths of up to 675mm) through reinforced concrete and asphalt.

KEY FEATURES:

Quick and precise cutting of reinforced concrete and asphalt (up to 675mm)
Wide variety of power sources and blade sizes to suit any job or application
Very little noise and no dust
Low level vibration
Can be used to remove defective concrete
Ideal for interior and exterior work

Do you have a floor sawing job in mind?

Call us on 0800 33 74 55 to find out more.

Request a Quote

*First Name

*Last Name

*Phone Number

*Email Address

*Enquiry

Please only enter your email here if you are not a real person.

Please enter your phone number here if you are a robot.

When you're ready to send the form, uncheck this box and continue. This helps keep our forms secure. Please uncheck this box to continue

Explore Our Services

Interact with the buttons below to see all of our services.

Concrete Cutting	Concrete Core Cutting	D-Kerb Cutting	Concrete Sawing	Chain & Ring Sawing
Floor Sawing	Wire & Track Sawing	Wire Sawing	About D-Drill	Contact Us

Concrete Scanning

"I would just like to say that your operative that came to the University of Leeds yesterday to commence with the 4nr core holes was a pleasure to have. He was very professional/ persistent and completed the works in hand. Thanks again."

University of Leeds - Site Supervisor

"2 of your employees, Paul Green and Graham Crowley, completed the drilling project on the Pendine Long Test Track with us today. I’d like to let you know that they carried out their work professionally, effectively and safely. They have done an excellent job within the timeline of the contract and they were a pleasure to have on site."

MOD - Pendine Long Test Track

"Thank you for sorting the holes out for me, your guy was an absolute pleasure."

John Holcroft - Owner of San Giovanni restaurant

"D-Drill carried out the works here in a very safe and controlled manner for the whole time, the workmanship and care they took for the task of cutting down existing culverts and drilling out core holes was brilliant. The client commented several times on this also."

Trant Engineering Limited - Site Manager

"The lads that attended site for us at Kings Lynn were fantastic, both us at TEi and Centrica were impressed with their professionalism, and just how quickly they removed all four of the plinths"

TEI Ltd - Supervisor

New library for students D-Drill were called out to the new library at the University of Birmingham for a floor sawing job. The aim was to form expansion joints in granite paviours to match existing concrete frame expansion joints. The challenge was that all cut lines are visible to the staff, pupils and general public so had to be straight and tidy with no scratch marks or overcutting. No other companies wanted to take on the work, as anything less than perfection would have been unacceptable due to its public location. D-Drill achieved neat, straight cutting which has blended in with the paviours and new building. The client and main contractor very happy with the end results, as work was carried out without any disturbance or fuss, the area was left clean and tidy, and with no staining to the granite paviours from cooling water or slurry. D-Drill went the extra mile and carried out some of the cutting works very early in the morning so as not to disturb the entry/exit of...

View Project

With over 55 years’ experience serving the construction industry, we are safe, accurate and reliable
A one-stop-shop for all your concrete scanning, drilling, sawing and demolition needs
Nationwide coverage with an extensive branch network using local in-house trained teams
Rapid response from our expert teams who take a professional, flexible approach to projects
We are constantly innovating, backed by pioneering ground-breaking research

We use the latest low-impact environmentally friendly equipment and strive to save time, money and the environment
Our work exceeds the Drilling & Sawing Association’s minimum standards
Supporting and investing in the construction industry, our MD serves on many national and internal boards
We invest heavily in training, particularly in apprentices; over 45% of our skilled workforce have been through our apprenticeship programme

Bursting & Crunching Concrete	Concrete Slurry	Wall Chasing	Vapour Blasting	Core Testing
Anchor Installation	Safety Barrier Installation	About D-Drill	Career Opportunities	Contact Us